Product Manual

Page 6 of 9
Inspect the tool for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Assembly Instructions
1. Connect the two-piece frame with the connect plates and bolts into a one-piece long frame.
2. Repeat step 1 to build another long frame.
3. Connect the two-piece long frame with the two-piece cross tube and bolts.
4. Tighten all of the bolts (see illustration).
Operating Instructions
Place the drums on the rack for storage.
Maintenance
Maintain the product by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from
oil and grease. The following chart is based on a normal operation schedule.
Maintenance Interval
Maintenance Point
After daily use
Clean the product with a dry, soft cloth.