Product Manual

DUAL SWING GATE OPENER
OWNER’S MANUAL
DUAL SWING GATE OPENER
OWNER’S MANUAL
• Industrial/Limited Access Vehicular Gate Opener – Class III – A vehicular gate opener (or
system) intended for use in an industrial location or building such as a factory or loading dock
area or other locations not intended to service the general public.
• Restricted Access Vehicular Gate Opener – Class IV – A vehicular gate opener (or system)
intended for use in a guarded industrial location or building such as an airport security area or
other restricted access locations not servicing the general public, in which unauthorized
access is prevented via supervision by security personnel.
Entrapment Protection
This gate opener complies with Gate Operator Safety Standard, UL 325. It uses a built-in
entrapment sensing system as the primary type of entrapment protection and has provisions for
connecting secondary entrapment devices.
Built-In Entrapment Protection
The gate opener will stop and reverse direction if it comes into contact with an obstruction
while the gate is opening or closing. If the gate opener obstructs twice while opening or closing,
an alarm will sound. The alarm will continue to sound until the power is turned off or until the
gate opener receives an intended signal from a hard wired control (e.g., push button or wired
keypad; neither is included with the gate opener). Wireless controls will not turn off the alarm.
Secondary Entrapment Protection Provisions
The gate opener has provisions for connecting third party contact and non-contact secondary
entrapment protection devices such as safety edge sensors and photoelectric sensors.
Technical Specification
CAUTION: Changes or modifications not expressly approved by the distributor could
void the user's authority to operate the equipment.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
General Safety Rules
WARNING:
• Read and understand all instructions. Failure to follow all instructions may result in
serious injury
• The warnings, cautions, and instructions discussed in this manual cannot cover all possible
conditions or situations that could occur. The operator must use common sense and caution
when using this product.
• DO NOT allow persons to operate or assemble this product until they have read this manual and
have developed a thorough understanding of how the product works.
• Never let children operate or play with gate controls. Keep the remote control away from children.
• Always keep people and objects away from the gate. No person should cross the path of the
moving gate. Do not allow children to play around the gate.
• Test the gate opener monthly. The gate MUST reverse on contact with a rigid object or stop when
an object activates the non-contact sensors. After adjusting the force or the limit of travel, retest
the gate opener. Failure to adjust and retest the gate opener properly can increase the risk of
injury or death.
• Use the emergency release only when the gate is not moving.
• Keep gates properly maintained. Read the owner’s manual. Only a qualified service person
should make repairs to the gate hardware.
• The entrance is for vehicles only. Pedestrians must use separate entrance.
• To AVOID damaging gas, power, or other underground utility lines, contact underground utility
locating companies BEFORE digging.
SAVE THESE INSTRUCTIONS
Important Safety Considerations
• DO NOT modify the product in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the product. There are specific applications for which
the product was designed.
• Inspect the work area before each use. Keep the work area clean and dry. Damp or wet work
areas can result in injury.
• Keep children away from work area. DO NOT allow children to handle this product.
• Dress properly. DO NOT wear loose clothing or jewelry, which can get caught in moving
parts. Contain long hair.
• Store idle equipment. Store the product when not in use. Store it in a secure place out of the
reach of children. Inspect it for good working condition prior to storage and before re-use.
2 of 26 3 of 26
Property
Input
Capacity
Max. actuator travel
Dimensions
Ambient Temperature
Specification
120V~ 60Hz
Gates weighing up to 650 lbs. or up to 12ft. long
15-1/4''
31-1/2'' × 4'' × 3-1/4''
-20°C~ +50°C (-4°F to 122°F)