Product Manual

Page of 8 4
5. (SEE FIGURE 5) Attach the first hose reel (D) to the roller (I), on the end with the crank handle
stem, using 6 bolts (5).
6. (SEE FIGURE 6) Place hose reel (D) into frame assembly (A). Insert end of crank stem from
hose reel (D) onto crank handle (E).
Align crank handle (E) mounting holes with crank stem mounting holes.
7. (SEE FIGURE 7) Insert bolt (3) through inside hole of crank stem and crank handle hole, Place
flat washer (10) onto bolt (3) fasten with lock nut (11). Tighten securely.
8. (SEE FIGURE 8) Attach hose coupling end of hose reel (D) to frame (A), using U-bracket.
Fasten U-bracket to frame with carriage bolts (I) and lock nuts (Q). Tighten securely.