Product Manual

4
WARNING:
OPERATING INSTRUCTIONS
BEFORE USE
1. Before using this product, read the owner's manual completely and familiarize yourself
thoroughly with the product and the hazards associated with its improper use.
2. Inspect before each use. Do not use if bent, broken or cracked components are noted.
WARNING: DO NOT LOAD BEYOND RATED CAPACITY.
OPERATION
1. Block the vehicle’s wheels for lifting stability. Set the Parking Brake in the vehicle.
2. Position the jack near desired lift point.
3. Attach the handle piece making sure to align with lowering valve, turn CLOCKWISE until tight.
4. Ensure application is compatible with product.
5. Read, understand and follow engine removal and installation instructions provided by vehicle
manufacturer service or shop manual.
6. This leveler is only to be used with an appropriately rated engine crane.
7. Connect the mounting chain on the leveler to the engine crane boom hook.
8. Chains used in conjunction with this product shall have a rated capacity greater than the rated
capacity of the product.
9. Secure the (4) Chain Mounting L-Bracket Assemblies to appropriate lifting points.
10. Refer to vehicle manufacturer service or shop manual for the location of appropriate lifting points.
11. Ensure load is centered.
12. Secure the load to prevent inadvertent shifting and movement.
13. Adjust the angle of leveler by turning the crank handle of the leveler. (Fulcrum may pivot when
lifting; use caution when lifting.)
14. After removing engine, immediately transfer the engine to appropriate engine support device
(engine stand).
15. Check to ensure stand is secure before working on or around.