Product Manual

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY CONSIDERATIONS

GENERAL SAFETY RULES

 For your safety, read, understand, and follow the information provided with and on this product

before using.

 The owner and/or operator of this equipment shall have an understanding of safe use/operating

procedures before attempting to use.

 The owner and/or operator shall be aware that the use of this product may require special skills

and knowledge.

 Instructions and safety information shall be conveyed in the operator's native language before

use of this device is authorized.

 If any doubt exists as to the safe and proper use of this product as outlined in this factory

authorized manual, remove from service immediately.

 Inspect before each use. Do not use if broken, bent cracked, or damaged parts (including labels)

are noted.

 If the product appears damaged in any way, operates abnormally or is missing parts, it should be

removed from service immediately and the manufacturer notified.

 If you suspect that the product was subjected to a shock load (a load suddenly dropped

unexpectedly upon it), immediately discontinue use until product has been clocked by a factory

authorized service center (contact distributor for list of Authorized Service Centers).

 It is recommended that qualified personnel do an annual inspection.

 Labels and owner's manuals are available from manufacturer.

 Not for use by children or people with reduced mental capacity.

 Do not use under the influence of drugs or alcohol.

 Ensure children and other bystanders are kept at a safe distance when using jack.

WARNING:

1. Study, understand, and follow all instructions before operating this device.

2. Do not exceed rated capacity.

3. Use only on hard, level surfaces.

4. Before moving, lower the load to the lowest possible point.

5. Use only slings or chains with a rated capacity greater than the weight of the load being lifted.

6. Do not allow load to swing or drop violently while lowering or moving.

7. No alterations shall be made to this product.

8. Make sure that boom is fully lowered before adding oil to unit reservoir.

9. Assure load is secured to the device.

10. To be used only with Shop Cranes and Engine Hoists.

11. Release load locking devices (if employed) slowly and carefully.

12. Do not use this crane for any use other than the manufacturer specified usage.

13. Failure to heed these markings may result in personal injury and/or property damage.