Product Manual

Page 11 of 18
The electric hoist is rated at a 550 lb. for a single line and 1100 lb. for a double line capacity.
Single Line Operation
During single line operation, the max rated load capacity is 550 lb. (250 kg). Do not exceed the max
rated load capacity. Single line loads can be connected with the support hook that comes already
attached to the wire cable. The load can be directly connected to the support hook (reference 73)
using a properly rated hoisting sling, chain, or shackle. Make sure the load is directly underneath the
hoist and not at an angle.
Double Line Operation
During the double line operation, the max rated load capacity is 1100 lb. Do not exceed the max rated
load capacity. Once the support hook is securely hooked into the double line support hole and the
safety clasp has been fully clasped, the pulley hook can be attached to the wire cable. Follow these
steps for attaching the pulley hook to the wire cable.
1. Remove the washers (81), nuts (75 & 76) and bolts (71 & 72) from the pulley.
73