Product Manual

Page 10 of 18
1. Always inspect the wire cable for any wear, fraying, or damage. Only wire cable in good condition
should be used. If the wire cable appears worn, frayed, or damaged, DO NOT connect any load to
use, replace immediately.
2. Inspect the wire cable to make sure it is spooled correctly. The wire cable should not be
overlapping on itself or have space between the rolls or slack in it. If the wire cable is spooled
incorrectly, DO NOT connect a load to it or use it until the wire cable has been re-spooled
correctly.
Operating Instructions
⚠WARNING
 Improper use can cause risk of fire, electric shock, or personal injury.
 Do not exceed the rated load capacity.
 Only operate the hoist when the load is centered under the hoist.
 Not intended to lift people or animals. Lifting people may result in severe injury or death.
 Keep bystanders away. Do not control hoist under load. Do not lift loads over people.
 Do not reverse wrap cable in drum. The up switch should always lift the load.
 Always leave a minimum of 4 wraps on the drum. The fastener between the cable and hoist is not
rated for maximum capacity.