Product Manual

Page 14 of 19
Maintain the hoist by adopting a program of conscientious repair and maintenance in accordance with
the following recommended procedures. It is recommended that the general condition of any tool be
examined before it is used. Keep the hoist in good repair Keep handles dry, clean, and free from oil
and grease. The following chart is based on a normal operation schedule.
Maintenance Interval
Maintenance Point
Before operating
Inspect the hoist for good working condition.
Check the condition of the electrical cords, plugs, and controls.
Check to be sure the hoist is mounted properly. Make sure the
bolts are tightened.
One month
Lubricate the rope occasionally with light oil.
Periodically make sure the hoist limit switches function
properly.
Troubleshooting
⚠WARNING
 Any part of the hoist that is damaged should be properly repaired or replaced by a qualified
technician before using the hoist.
 If the troubleshooting methods do not work, do not attempt to alter the hoist.
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
Hoist does not operate
properly.
Fails to connect to the
power.
Check that the plug is connected to the
power.