Product Manual

Page 11 of 19
The electric hoist is rated at 1100 lb. for a single line and 2200 lb. for a double line capacity.
Single Line Operation
During single line operation, the max rated load capacity is 1100 lb. (500 kg). Do not exceed max
rated load capacity. Single line loads can be connected with the support hook that comes already
attached to the wire cable. The load can be directly connected to the support hook (73) using a
properly rated hoisting sling, chain, or shackle. Make sure the load is directly underneath the hoist and
is not at an angle.
Double Line Operation
During double line operation, the max rated load capacity is 2200 lb. Do not exceed the max rated
load capacity. Once the support hook is securely hooked into the double line support hole and the
safety clasp has been fully clasped, the pulley hook can be attached to the wire cable. Follow these
steps for attaching the pulley hook to the wire cable.
73