20-LED Solar-Powered Motion Security Light Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This solar-powered light is designed for certain applications only.
Table of Contents Intended Use ......................................................................................................................................... 4 Technical Specifications ..................................................................................................................... 4 Important Safety Information .............................................................................................................. 4 Assembly Instructions ................................
Intended Use The Ironton 120-LED Solar-Powered Motion Security Light delivers twice the illumination and versatility. With the included mounting plate, you have the option of positioning on a flat wall to illuminate a large area or on a corner to light two separate areas. Each light head adjusts to suit your needs. Motion detection automatically activates the lights when motion is detected from up to 40 feet.
⚠WARNING WORK AREA Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication.
Make sure this is clear of obstacles such as cables and electric lines. Secure lamp to the wall with screws provided. Carefully route the wire from the solar panel to the lamp and plug it into the battery housing input. Adjust the motion sensor so that it faces the area where motion detection is desired. You can move it up and down by adjusting the screw on the neck of the motion detector.
Operating Instructions 1. Before the light can operate to its full capacity, allow the unit to charge in sunlight for 3 days with the solar panel wire connected to the light. Charging should be done with the unit in the “OFF” position. 2. Located at the bottom of the Battery Housing there is am OFF/AUTO/ON switch: “AUTO” position, the light will turn on automatically when motion is detected. “ON” position, the light can be used as a standard light for constant illumination.
Location of Solar Light Solar powered lights require sunlight to recharge the internal batteries. For best results, locate the Solar Panel in a position where it will receive direct sunlight, and is generally free from cover and shade. Maintenance Maintain the light by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures Maintenance Interval Maintenance Point Allow the solar panel to charge the light for two sunny days.
Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure Possible Cause Corrective Action Ensure the solar panel is in a location where it will receive maximum sunlight during daytime hours. Batteries are not charged. Turn the light to the OFF position and allow the solar panel to charge the batteries for two sunny days.
Failure Possible Cause Corrective Action Solar panel is not receiving enough sunlight and not able to recharge batteries. Clean the solar panel with a clean damp cloth. It is winter and there is not as much sunlight as during summer, and the solar panel is not able to recharge the batteries Ensure the solar panel is located in a place where it will receive the maximum amount of sunlight during the day. Remove any object that throws shade on the solar panel.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
