4000-Lb. Web Strap Puller Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This strap puller is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway 4000-Lb. Web Strap Puller is a versatile multi-purpose work tool for pulling, stretching, and moving heavy loads. It can also be used for industrial maintenance and repair. The puller has a heat-treated steel frame, a double steel gear construction, 2 hooks, and an 8 ft. x 1 in. ratchet strap. It has a 4000 lb. capacity. Technical Specifications Property Pulling Capacity Strap Size Gear Hook Finish Specification 4000 lb. 1 in. x 8 ft.
insulated and contact will cause electrical shock. • Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. • Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted.
• Do not use for overhead pulling or vertical lifting. • Do not use to transport or lift people or animals. • This strap puller is not for aircraft purposes or for linking towed vehicles. • DO NOT pull the webbing over or around a corner. • DO NOT wrap the webbing around any object and hook it back on itself. • When this tool is being used to pull an object, make sure the stop pawl spring is engaged. • Never use a “cheater” pipe or other device to lengthen the handle for additional leverage.
Before Each Use ⚠WARNING • Inspect the general condition of the strap puller. Check for loose screws, misalignment, or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. • Inspect the strap along its full length for fraying, kinks, broken strands, or distortion. If they appear, the webbing should be replaced.
Extending the Webbing • Secure the hooks and pulley to a rigid anchor. Press the drive pawl switch in the position shown below (A). • Depress the stop pawl in the direction of the arrow below (B). • At the same time, pull the webbing until the desired slack is obtained. Raising Loads or Applying Tension • Engage the drive pawl and ratchet wheel. The position of the switch is shown below (A). • Operate the handle in the direction of the arrow (B).
Maintenance Maintain the product by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from oil and grease. The following chart is based on a normal operation schedule.
Parts Diagram Parts List Part Number 1 2 3 4 5 6 7 8 9 10 11 Part Description Hook Frame Stop Pawl Spring Stop Pawl Trigger Ratchet Drive Pawl Guard Drive Pawl Spring Webbing Handle Pulley Hook Quantity 1 1 1 1 1 1 1 1 1 1 1 Replacement Parts • For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. • Not all product components are available for replacement.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of 1 year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.