Product Manual

Page 13 of 18
4. To raise the cradle by turning the rotating crank, turn the handle clockwise, keeping the other
hand firmly on the handlebars. Lift up to the desired height with the desired direction. Now the
board can be attached to the ceiling.
Maintenance
Maintain the product by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from
oil and grease. The following chart is based on a normal operation schedule.
Maintenance Interval
Maintenance Point
Daily before and after operating
Clean the machine completely, in particular the sliding parts
and the gear-pulley assembly.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local dealer.
If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
The drywall won’t move.
The castors are locked by brake.
Release the brake on castors.
The cradle won’t fall.
The locking device is open like the
image below.
Check the locking device and
lock as shown here.