Product Manual

Page 9 of 13
2. Use the three hooks to clamp the drum.
3. Pull the handle to the horizontal position and the drum will be lifted. You can now move it.
Maintenance
Maintain the product by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from
oil and grease. The following chart is based on a normal operation schedule.
Maintenance Interval
Maintenance Point
After daily use
Clean the product with a dry, soft cloth.
When not in use
Store the product in a dry place out of direct sunlight.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
Cannot move the drum
lifter.
The brake stops the drum
lifter.
Check and release the brake.
The handle cannot move
up and down.
The handle is locked.
Pull the iron bar to the outside (shown)
to loosen the lock.