Product Manual

Page 7 of 9
Figure 4 Figure5
Note: Each time you overlap a cut, the edge will become smoother.
5. Repeat step 4 until the desired cut is complete.
Maintenance
1. Lubricate moving parts periodically.
2. Check bolts and nuts frequently for tightness.
Parts Diagram
Parts List
Part Number
Part Description
Quantity
A
Knob
1
B
Bracket
1
C
Cutter Base
1
D
Blade
1
E
Lever
1
F
Handle
1
Replacement Parts
 For replacement parts and technical questions, please call Customer Service at 1-800-222-5381.
 Not all product components are available for replacement. The illustrations provided are a
convenient reference to the location and position of parts in the assembly sequence.
 When ordering parts, the following information will be required: item description, item model
number, item serial number/item lot date code, and the replacement part reference number.
 The distributor reserves the rights to make design changes and or improvements to product lines
and manuals without notice.
A Knob
B Bracket
C Cutter Base
D Blade
E Lever
F Handle