500A & 800A Jumpstarter Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This jumpstarter is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Specifications #53013 ........................................................................................................................... 4 Specifications #53014 ........................................................................................................................... 4 Important Safety Information ...............
Intended Use The Strongway 500A/800A Jumpstarter is easy to use and designed for years of reliable service. It can run many DC appliances whenever you need power for work or play, at home, or on the road. The 500A/800A jumpstarter has a battery inside and is designed for jumpstarting SUVs, trucks, and vans.
Important Safety Information ⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage. The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise common sense and caution when using this jumpstarter. Always be aware of the environment and ensure that the jumpstarter is used in a safe and responsible manner.
Stay alert, watch what you are doing, and use common sense when operating the jumpstarter. Do not use the jumpstarter while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the jumpstarter may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
children. Inspect the unit for good working condition prior to storage and before re-use. Use only accessories that are recommended by the manufacturer for use with your jumpstarter. Accessories that may be suitable for one product may create a risk of injury when used with another unit. Never use an accessory that has a lower operating speed or operating pressure than the unit itself. Do not leave the jumpstarter running unattended.
EYES: if battery acid comes in contact with eyes, flush eyes immediately, for a minimum of 15 minutes and seek immediate medical attention. Main Parts of Product REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Subassembly Boosting On/OFF Switch Fuse for DC socket Positive boosting cable Work light off button Work light SOS Work light Strobe Work light on button 12V DC sockets Handle Work light LCD display Charging port 4 USB ports ( 3.
Charge unit fully prior to each use. Follow all instructions published by the battery manufacturer and the manufacturer of the equipment in which the battery is installed. Make sure the area around the battery is well-ventilated. Never smoke or allow a spark or flame in vicinity of the engine or batteries. Batteries contain acid and produce explosive gases. Shield eyes and face from batteries at all times.
6. Recharge the jumpstarter immediately after use. Refer to Recharging the Jumpstarter with AC Charger. Operating USB Appliances ⚠CAUTION EQUIPMENT DAMAGE Never connect the USB power port directly to a computer USB outlet. Doing so may cause damage to both the power port and USB outlet. Using the USB Port 1. Check battery capacity status by pushing the “BATTERY” button to ensure that the battery is fully charged. 2.
10. Disconnect the clamps from the battery of the vehicle if the connections are reversed (RED reverse polarity indicator is ON and alarm is sounding) and repeat the steps 7 , 8 and 9, then proceed to step 11. 11. Turn ON the jumpstarter’s boosting ON/OFF switch when the correct connection indicator is on. Crank the engine for 1–3 seconds or until it starts, whichever is first. 12. Turn OFF the boosting ON/OFF switch after using the unit. 13.
Recharging the Battery ⚠WARNING Always ensure that internal battery is fully charged. Do not overcharge the battery. Leaving a battery in a discharged state or without recharging every 90 days may result in permanent damage to the battery and poor boosting performance. Do not use the AC or DC outlets while the power pack is being charged. Doing so may damage the charging adapter. Do not attempt to recharge the internal battery if it is frozen.
Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure Possible Cause That battery in the jumpstarter is not fully charged. The jumpstarter does not boost vehicle No charging indication on LCD screen when recharging. The unit cannot be fully charged after 72 hours. The alarm sounds and reverse polarity indicator is ON.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
