Product Manual

Page 9 of 12
maintenance in accordance with the recommended procedures found in this manual. If any
abnormal vibrations or noise occurs, turn the tool off immediately and have the problem corrected
before further use. Have necessary repairs made by qualified service personnel.
 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control. Keep handles dry, clean, and free from oil and grease.
 Use only soap and a damp cloth to clean your tools. Many household cleaners are harmful to
plastics and other insulation. Never let liquid get inside a tool.
 Always disconnect from the power source before carrying out any maintenance, lubrication, or
cleaning operations.
 Keep the sharpener clean using a cloth rag with soap and water. Always dry after cleaning.
 Never use compressed air for cleaning. It can cause wood or metal dust to reach small areas in
the sharpener, causing damage to essential components of the sharpener.
Parts Diagram