Product Manual
Page 8 of 12
Operating Instructions
⚠WARNING
Wear ANSI Z87.1 compliant safety goggles, hearing protection, a NIOSH compliant dust mask,
and work gloves when operating the machine.
Do not use grinding wheels that have a Max RPM less than the marked RPM Rating on the tool.
Keep hands clear from grinding wheel during use.
Electric shock hazard. Do not expose to rain or use in damp locations.
Use an outdoor rated extension cord.
Ensure that the chain being sharpened is properly secured so it doesn't slip out.
Keep the machine clear of debris during operation.
Do not use the machine in the proximity of flammable liquids and vapors.
Always hold the machine with both hands when working. Keep a safe footing and good posture.
Not for use by or around children.
First, check that you have the proper size grinding wheel to match your chain. Check your
chainsaw specifications.
Be sure the wheel is securely installed. Always check the wheel for any damage before each use.
NEVER use without a wheel guard installed.
Install the sharpener onto chainsaw chain bar (centered).
Note: This machine is equipped with a safety switch with a release coil.
The provided power cables are complete with terminals for quick and safe connection to any 12V
battery. This allows the operator to use this sharpener on-the-job or in-the-field, wherever a 12V
battery is available.
Running the Machine
1. Make sure you have read the safety instructions at the beginning of the manual and that the
machine is set up properly.
2. Make sure all tools and objects used during set up are cleared away from the machine.
3. Turn the machine ON (push the "|" button).
4. Listen to and watch for abnormal noises or actions. The machine should run smoothly with little or
no vibration or rubbing noises. Strange or unusual noises should be investigated and corrected
before operating the machine further. Always disconnect the machine from power when
investigating or correcting potential problems.
5. Turn the machine OFF (push the "O" button).
Maintenance
⚠WARNING
Make sure this sharpener is disconnected from its power source before attempting any maintenance,
cleaning, or inspection.
Maintain your tools. It is recommended that the general condition of any tool be examined before
it is used. Keep your tools in good repair by adopting a program of conscientious repair and