Product Manual

Page 9 of 22
Attaching Casters to Bases
(11) Nut M10 (12) Spring Washer Φ10 (13) Washer Φ10 (14) Bolt M10×30
1. Attach one Locking Swivel Caster (1) to one end of Base (2) using four sets of Bolts (14), Spring
Washers (12), Washers (13), and Nuts (11).
2. Repeat assemblies for the other three casters.
3. Tighten connections securely.
4.Apply grease to each Caster bearing.
Attaching Post Insert to Post Sleeve
1. Place the Post Insert (7) into the Post Sleeve (3) connect with Insert Pin (5), then attach with R-
Pin (25).