Product Manual

Page 10 of 22
2. Repeat for the other side Post. Make sure to adjust the post to the some height.
Attaching Post Supports to Base and Post Sleeve
(20) Nut M16 (19) Spring Washer Φ16 (18) Bolt M16×110
(17) Nut M14 (15) Washer Φ14 (36) Washer Φ16 (16) Bolt M14×40
1. With assistance, lift the crane to the upright position.
2. Attach Post Sleeve (3) to Left Base (2) and assemble using Bolts (18), Washers (36), Spring
Washers (19), and Nuts (20).
3. Attach Post Supports (4) to Left Base and Post Sleeve (3) using Bolts (17), Washers (15), and
Nuts (16).
3. Tighten connections securely.
4. Repeat for Right Base and Post Assemblies.