Product Manual

Page 9 of 22
Attaching Casters to Bases
(11) Nut M8 (12) Spring Washer 8 (13) Washer 8 (14) Bolt M8×25
1. Attach one Locking Swivel Caster (1) to one end of Base (2) using four sets of Bolts (14), Spring
Washer (12), Washer (13), and Nuts (11).
2. Repeat assemblies for the other three casters.
3. Tighten all connections securely.
4.Apply grease to each Caster bearing.
Attaching Post Insert to Post Sleeve
1. Place the Post Insert (7) into the Post Sleeve (3) and connect with Insert Pin (5), then attach
with R-Pin (25).