Product Manual

Page 14 of 22
3. Pull the Safety Shaft (34) to release the hook on Pin A, lift the handle and hook up on Pin B.
4. Repeat the above procedure until desired height achieved.
Before Operating Crane
1. Familiarize yourself with all operating controls of the crane and with the operation(s) to be
performed. Instructions include, the warnings on the post, and the safety and operating
instructions portion of this manual.
⚠WARNING
 TO PREVENT SERIOUS INJURY FROM CRANE FAILURE: Do not use damaged equipment. If
adjustments or repairs are necessary, or any defects are known, have the problem corrected
before further use.
2. Do not operate a crane that is out-of-order.
3. Only a qualified technician should perform maintenance to the crane.
4. Designate a work area that is clean and well-lit. The work area must not allow access by
children or pets to prevent distraction and injury.
5. There must not be objects, such as utility lines, nearby that will present a hazard while working.
6. Lock casters before lifting a load.
7. Adjust two sides to the same Post and insert (7) in the same level hole.
Operating Instructions
⚠WARNING
 TO PREVENT SERIOUS INJURY AND DEATH: Use warning signs and barriers on the floor
beneath the gantry crane where overhead maintenance work creates a hazard.
 Wear ANSI-approved safety goggles, hard hat, heavy-duty work gloves, and steel-toed work boots
during operation.