Product Manual

Page 10 of 22
2. Repeat for another side Post. Make sure to adjust the post to the some height.
Attaching Post Supports to Base and Post Sleeve
(20) Nut M14 (19) Spring Washer 14 (18) Bolt M14×90
(17) Nut M14 (15) Washer 14 (16) Bolt M14×40
1. With assistance, lift the crane to the upright position.
2. Attach Post Sleeve (3) to Left Base (2) and Assemblies using Bolts (18), Washers (15), Spring
Washer (19) and Nuts (20).
3. Attach Post Supports (4) to Left Base and Post Sleeve (3) using Bolts (17), Washers (15), (19) and
Nuts (16).
3. Tighten all connections securely.
4. Repeat for Right Base and Post Assemblies.