Product Manual

9
3. Purge air trap in the system by opening the attached oil vent, do not remove oil vent. Oil vent Is to stay
open at all times when in use. (Oil vent is closed during shipping)
For units with rubber oil plugs: {With a flat blade screwdriver, push the oil fill plug slightly to the
side to purge trapped air from system. (Use caution not to tear or puncture the oil plug.)}
4. Turn release valve clockwise to the closed position.
5. Jack is now ready for use. Check for proper pump action.
BEFORE USE
1. Before using this product, read the owner's manual completely and familiarize yourself thoroughly with
the product and the hazards associated with its improper use.
2. Perform the air purge procedure. (See previous instructions for system purge procedure.)
3. Check and that the pump operates smoothly before putting into service.
4. Inspect before each use. Do not use if bent, broken or cracked components are noted.