Product Manual

2
Thank you very much for choosing a Strongway product! For future reference, please complete the
owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for issues
arising from modification. We strongly recommend this machine not be modified and/or used for any
application other than that for which it was designed. If you have any questions relative to a particular
application, DO NOT use the machine until you have first contacted the distributor to determine if it can
or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
This Jack is designed for lifting. The jack can be used vertically or angled to 3 degrees form vertical position.
After lifting, loads must be immediately supported by appropriate means. Each model is suitable for use in
lifting or positioning vehicles, machinery, houses and/or other building structures. These jacks comply with
ASME PALD Standards. For air actuated use, ensure that your air source has a working range of 100-120
PSI.
TECHNICAL SPECIFICATIONS
Item
Description
Maximum Capacity
16,000 lbs.
Minimum Lift Height
24 in.
Maximum Lift Height
42-15/16 in.
Safe Operating Temperature is between 40°F – 105°F (4°C - 41°C)
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble this Jack until they have read
this manual and have developed a thorough understanding of how the Jack works.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be understood
by the operator that common sense and caution are factors that cannot be built into this product, but
must be supplied by the operator.
SAVE THESE INSTRUCTIONS