Product Manual
Page 7 of 22
Specific Operation Warnings
⚠WARNING
• To prevent serious injury or property damage, read and understand owner’s manual before
operating.
• Electric shock hazard. Do not expose the unit or the plug to water or rain. Do not use the fan near a
water source such as a swimming pool, bathtub, or shower.
• Be sure the fan is properly grounded.
• Do not use this fan with any solid-state speed control device.
• Only plug the unit into a power outlet with the same voltage as rated voltage of it.
• Rotating blade hazard. Keep hands clear to avoid serious injury.
• Do not operate in the presence of explosive and/or flammable fumes.
• Always disconnect the power before servicing and cleaning or moving the fan to a new location.
• Do not plug/unplug the fan into/from the electrical outlet while wet or standing in a wet or damp
area.
• Never operate the fan without the guard in place.
• For indoor use only. Do not use outdoors. Do not place the fan in or near a window. Rain may
create an electrical hazard.
• This product employs overload protection (fuse). A blown fuse indicates an overload or short-
circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the
user servicing instructions (follow product marking for proper fuse rating) and check the product. If
the replacement fuse blows, a short-circuit may be present and the product should be discarded or
returned to an authorized service facility for examination and/or repair.
• Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized
service facility for repair before resuming operation.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings.
• Do not place cord under furniture or appliances. Arrange cord away from a higher traffic area and
where it will not be tripped over.
Grounding
⚠WARNING
• This machine must be grounded while in use to protect the operator from electrical shock. This
unit is equipped with an electrical cord that has an equipment grounding conductor and a
grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed
and grounded in accordance with ALL local codes and ordinances.
• DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper
receptacle installed by a qualified electrician.
• CHECK with a qualified electrician or service person if you do not completely understand the