Product Manual

Page 14 of 19
• Rotating blade hazard. Keep hands clear to avoid serious injury.
• Do not operate in the presence of explosive and/or flammable fumes.
• Do not plug/unplug the fan into/from the electrical outlet while wet or standing in a wet or damp
area.
• Never operate the fan without the guard in place.
• Do not place the fan in or near a window. Rain may create an electrical hazard.
• Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized
service facility for repair before resuming operation.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings.
• Do not place cord under furniture or appliances. Arrange cord away from a higher traffic area and
where it will not be tripped over.
1. Plug the fan into an electrical outlet.
2. Pull power chain once to operate the low speed. Allow it to run for 10 seconds. Once 10 seconds
have passed, pull the power chain to the medium or high position.
AfterEach Use
Always turn off (0-Off) and unplug the fan after using.
Maintenance
Maintain your fan. It is recommended that the general condition of any fan be examined before it is
used. Keep your fan in good repair by adopting a program of conscientious repair and maintenance in
accordance with the recommended procedures found in this manual.
1. Depending on the usage, a regularly scheduled inspection should be established.
2. Check for unusual noises when the fan is running.
3. Periodically inspect and tighten all bolts, screws, and set screws.