Product Manual

Page 6 of 14
 Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
before using.
 Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
 Store the product when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
⚠WARNING
 To prevent serious injury and property damage, read and understand the owner’s manual before
usi
 Avoid touching your eyes while working with a battery. Have plenty of fresh water and soap nearby
for use in case battery acid contacts your eyes, skin or clothing. If this happens, wash immediately
with soap and water, and then get medical attention.
 Risk of explosion. Batteries contain acid and produce explosive gases. Keep sparks, flames, and
cigarettes away from the battery at all times.
 Risk of fire and explosion. Do not overcharge battery.
 Wear ANSI Z87.1 compliant safety goggles and face shield during use.
 Risk of electric shock. Unplug cord before servicing. Connect to a GFCI outlet. Do not use in wet
conditions.
 Do not use an extension cord.
 Remove metal items such as rings, bracelets and necklaces while working with this charger. Lead
acid batteries can produce a short circuit high enough to cause burns.
 Use only in a well-ventilated area.
 Make sure you have adequate space to use this charger. Position the charger as far away from
the battery as permitted by DC Cable.
 Never place the charger directly above the battery that is being charged; as this may cause the
charger to be damaged by gases expelled from the battery.
 Never set a battery or any other object on the charger.
 Do not operate if cords or wires are frayed or defective, or if charger base is defective in any way.
Do not attempt to open the charger as this could result in electric shock. Replace damaged parts
before continuing use.
 This unit is comprised of switches which could produce sparks. Make sure you have adequate
space to use this charger.
 Use only on lead acid batteries. Do not use this charger for charging dry cell batteries, such as