Product Manual

2
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s
record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become
familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for issues arising
from modification. We strongly recommend this machine not be modified and/or used for any application other
than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the
machine until you have first contacted the distributor to determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
This low-profile jack is ideal for stabilizing your Motorcycle, ATV or UTV while you detail or make repairs. The
convenient foot pump raises the load to rest on adjustable lockable lift heights. The jack doubles as a support
stand with rubber grip pads to help protect the motorcycle frame. Welded tie-down brackets help to keep the load
secure. Meets ASME PALD safety standards.
TECHNICAL SPECIFICATIONS
Description
Item
46238
Maximum Capacity
1500 lbs.
Minimum Lifting Height
5-1/8 in.
Max. Lifting Height
16-1/8 in.
Safe Operating Temperature is between 40°F – 105°F (4°C - 41°C)
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in
serious injury.
CAUTION: Do not allow persons to operate or assemble this jack until they have read this manual and
have developed a thorough understanding of how the jack works.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions or situations that could occur. It must be understood by the operator that common
sense and caution are factors that cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS