Product Manual

Page 13 of 17
2. Transporting the Fan
a) Ensure the fan is unplugged from the power source before adjusting the height or angle.
b) Place the fan on a secure, flat surface where it cannot fall or be pulled by the cord.
c) Fold the fan into floor mode.
• Unscrew the triangle knob.
• Pull the pump up and adjust the tilt angle until the fan head folds back.
d) Use the wheels to move the fan.
After Each Use
Always turn off (0-Off) and unplug the fan after using.
Maintenance
1. Depending on use, a regularly scheduled inspection should be established.
2. Check for unusual noises when the fan is running.
3. Periodically inspect and tighten all bolts, screws, and set screws.
4. Unplug the fan before cleaning. Do not immerse any part of the fan in water. Slightly moisten a
cloth and then wipe off the surfaces of the fan.
5. In order to remove dust from the grill, use a vacuum cleaner or disassemble the front grill by
removing the securing clip on the edge of the grill. After cleaning, assemble the grill and secure
the clip.
Maintain the fan by adopting a program of conscientious repair and maintenance in accordance with
the following recommended procedures. It is recommended that the general condition of any tool be
examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from oil
and grease. The following chart is based on a normal operation schedule.