Product Manual

Page 12 of 17
Before Each Use
Place the fan on a safe, flat surface where it cannot fall or be pulled by the cord.
Operating Instructions
WARNING
Electric shock hazard. Do not expose the unit or the plug to water or rain. Do not use the fan near
a water source such as a swimming pool, bathtub, or shower.
Be sure the fan is properly grounded.
Do not use this fan with any solid-state speed control device.
Only plug the unit into a power outlet with the same voltage as rated voltage of it.
Rotating blade hazard. Keep hands clear to avoid serious injury.
Do not operate in the presence of explosive and/or flammable fumes.
Do not plug/unplug the fan into/from the electrical outlet while wet or standing in a wet or damp
area.
Never operate the fan without the guard in place.
For indoor use only. Do not use outdoors. Do not place the fan in or near a window. Rain may
create an electrical hazard.
Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized
service facility for repair before resuming operation.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings.
Do not place cord under furniture or appliances. Arrange cord away from a higher traffic area and
where it will not be tripped over.
1. Turning the Fan On/Off and Adjusting the Airflow Settings
a) Plug the power cord into an outlet.
b) Turn the switch to the desired speed. The three settings are:
0 = Off,
1 = Low,
2 = Medium, and
3 = High.