Product Manual

Page 7 of 11
STEP 5
Screw the MIDDLE POLE (C) into the BOTTOM POLE (D). The
bottoms of the MIDDLE POLE (C) are indicated by pre-installed
pole connectors. Make sure all (4) MIDDLE POLES (C) are
screwed on tightly.
STEP 6
Starting with lowest position install the next set of SLIP
SLEEVES (F) on (4) MIDDLE POLES (C). Place another SHELF
(A) over the poles and secure the SHELF (A) so top of the SLIP
SLEEVES (F) are flush with top of the corner cylinders on the
SHELF (A).
Repeat until all shelf positions on the MIDDLE POLES (C) have
a SHELF (A).
STEP 7
Screw the TOP POLE (B) into the MIDDLE POLE (C). The tops
of these poles are indicated by the BLACK END CAP. Make sure
all (4) TOP POLES (B) are screwed on tightly.
STEP 8
Starting with lowest position install the next set of SLIP
SLEEVES (E) on (4) TOP POLES (B). Place another SHELF (A)
over the poles and secure the SHELF (A) so top of the SLIP
SLEEVES (E) are flush with top of the corner cylinders on the
SHELF (A).
Repeat until all shelf positions on the TOP POLES (B) have a
SHELF (A).
The Feet Levelers are already screwed into your BASE (E) and
you can adjust as needed to ensure your storage rack is level.