Product Manual
Maintain the Air Mover by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure Possible Cause Corrective Action
Air mover not
running.
No power input. Plug in the air mover; check circuit breaker.
Switch not turned to ‘on’ position. Turn switch to ‘on’ position.
Air mover fan wheel jammed. Remove material jamming fan wheel.
Intake or exhaust blocked.
Turn unit off and allow to cool; remove
blockage.
Air mover is
vibrating.
Accumulation of dirt on fan blades. Clean air mover fan blades.
Parts Diagram
Page 9 of 12