Product Manual

Assembly Instructions
Strongway’s ½ HP Air Mover is shipped ready-to-use. Before plugging the unit into the power source,
completely inspect it for any shipping damage.
Before Each Use
⚠WARNING
Always inspect power cords for damage before operating.
Operating Instructions
1. Plug the electrical cord into the power outlet. To reduce the risk of electric shock, connect only
to an outlet provided with a Ground Fault Circuit Interrupter device.
2. Carefully place the air mover on a stable, flat, dry surface.
3. The unit has four position capabilities to aim airflow across flat surfaces or to angle it upward.
4. Turn the switch to select the desired speed, while making sure unit operates normally.
5. All air movers in operation must be supervised at all times.
After Each Use
Always disconnect the air mover from its power source and wrap the cord around the handle. When
not in use, store the air mover in a dry, indoor space out of reach of children. Air movers can be
stacked up to 4 on their sides for storage. (The stacking feature is not secure for transportation.)
Maintenance
⚠WARNING
NEVER directly clean the air mover with water. ALWAYS disconnect it from its power source before
performing any maintenance or cleaning.
Page 8 of 12