Operation Manual

8
Installation
www.strongsat.com
To install your Viasat set-top box, follow the instructions from this page
up to page 22.
❖ The supplied equipment
If you have not already done so, remove all the packaging.
You should have the following items:
◆ Viasat set-top box (see page 7)
◆ Remote control and batteries (see page 4)
◆ User guide
◆ Mains lead - with 2-way set-top box connector and 2-pin mains
plug (see right)
◆ SCART lead (see right)
◆ RF lead (see right)
◆ Telephone lead - RJ11 to RJ11 (see right)
◆ Telephone line (RJ11) adapter suitable for your location (see
page 13)
❖ Where to place your set-top box
Before you start, make sure that your TV, VCR and set-top box will be
placed in a location that is conveniently located:
◆ near an easily-accessible mains wall socket;
◆ within reach of your TV-antenna and satellite-dish leads;
◆ within 10 metres of a telephone point. (If not, you will need an
extension telephone lead.)
WARNING
Before you connect your set-top box to any other
equipment, you must disconnect ALL the equipment from
the mains supply.
Mains lead
SCART lead
RF lead
Telephone lead