Operation Manual

7
ENGLISH
www.strongsat.com
❖ Rear panel connectors overview
Full details about connecting up and installing your set-top box begin
on page 8.
WARNING
Always disconnect your set-top box from the mains supply
before you connect it to (or disconnect it from) any other
equipment.
SCART TV
To connect to the SCART
connector on your TV (if your
TV has a SCART connector)
ANT IN
To connect the lead
from your TV antenna
SAT IN
To connect the lead
from your satellite dish
SCART VCR
To connect to the SCART
connector on your VCR (if your
VCR has a SCART connector)
230V 50Hz mains in
Do not connect the mains plug to
the wall socket until you have
made ALL the other connections
telephone line in
To connect the telephone lead
SPDIF (optional connector)
3.5 mm combined digital-optical and analogue-
stereo audio connector. This connector is not
fitted on all models
To connect to either a digital-optical or an
analogue-stereo audio input on your home
cinema, TV, video recorder or stereo sound
equipment
You can use this dual-purpose connector to
connect to various audio inputs - please
consult your electrical retailer for more details
of the leads available
TO TV
To connect an RF lead
to your TV (or VCR)
Your set-top box