Operation Manual

42
Setup
www.strongsat.com
❖ Restoring the factory settings
If you wish, you can restore all your set-top box’s factory-preset
settings.
The items that are restored, and what they will be restored to, are
shown below.
To restore the factory settings:
1. On the Setup menu, highlight ‘Restore factory settings’, then
press OK.
2. A message displays asking you to confirm you want to restore
the factory settings. If you are sure you want to do this, press
OK. If you do not want to restore the factory settings, press
back.
The message ‘Default settings restored’ displays.
3. Press OK. The set-top box displays the Welcome screen (see
page 18).
4. Select the country and search for channels as described on
pages 18 to 22.
Note
If you restore your set-top box’s factory settings, you will need to
redo the country selection and search for channels - see page 18.
Setting Factory setting
Menu/banner language English
Audio language English
Subtitle language English
Volume level MAX
TV format 4/3
TV output signal RGB
RF output channel 38
Magic eye support Off