Operation Manual

41
Setup
ENGLISH
www.strongsat.com
Adding extra channels
You can search for extra channels that may be available on the satellite
that your set-top box is tuned to.
To add extra channels:
1. On the Signal Settings menu, highlight ‘Manual Search’, then
press OK.
The Manual Search screen displays.
2. Highlight the ‘Satellite’ line, then press L or R to select the
satellite that you want to search.
3. Press U or D to highlight each item you want to change, then
use the number buttons or L and R to enter the values you
want.
4. Repeat steps 2 and 3 to change the details for other satellites, if
required.
5. To start the search, press OK.
❖ Viewing set-top box information
You can view technical information about your set-top box.
To display the information:
1. On the Setup menu, highlight ‘Decoder information’, then press
OK.
2. To redisplay the Setup menu, press back.