Operation Manual

40
Setup
www.strongsat.com
Searching for channels
Once you have confirmed the satellite signal strength, if you have
changed your Antenna Configuration, you need to search for channels.
To search for channels:
1. On the Signal Settings menu, highlight ‘VIASAT channels’, then
press OK.
The Auto Search screen displays:
2. To start the automatic channel search, press OK.
A progress screen displays to confirm that the search is taking place.
When the search is complete, a screen displays to tell you the number
of TV and radio channels that your set-top box has found.
3. To confirm these channels and redisplay the Signal Settings
menu, press OK.