Operation Manual

37
Setup
ENGLISH
www.strongsat.com
❖ Using the Signal Settings menu
You use the Signal Settings menus to:
◆ select the antenna and LNB configuration that you have
connected to your set-top box;
◆ check that your set-top box is receiving satellite signals, and
check the strength and quality of the signal;
◆ carry out a search for new channels.
To display the Signal Settings menu:
1. On the Setup menu, highlight ‘Signal Settings’, then press OK.
2. Press D or U to highlight the item you want, and press OK.
Then see the relevant section on the following pages.
3. When you have finished using the Signal Settings menu, press
back to redisplay the Setup menu.