Operation Manual

35
Setup
ENGLISH
www.strongsat.com
❖ Changing the TV settings
You use the TV Settings menu to change the following settings, to
control how your set-top box works with your other equipment:
◆ TV format;
◆ TV output signal;
◆ RF output channel;
◆ Magic eye support.
To change the TV settings:
1. On the Setup menu, highlight ‘TV Settings’, then press OK.
The TV Settings menu displays.
2. Press U or D to highlight the setting you want to change (for
more information on the settings, see page 36).
3. Press L or R to change the setting. To change the ‘RF output
channel’, press L to delete the number that is there, then use
the number buttons to enter the RF channel number you want.
4. When you have made all the changes you want to make, press
OK. Or, to remove the menu without saving any changes, press
back.