Operation Manual

31
Setup
ENGLISH
www.strongsat.com
❖ Using the Control Settings menu
You use the Control Settings menus to:
◆ set an age lock level to control who can watch certain digital
satellite programmes;
◆ set a purchase threshold to control how much other people are
allowed to spend on purchase TV;
◆ change the PIN code;
◆ view your entitlements.
When you use the Control Settings menu, you need to enter your PIN
code.
About your PIN code
When you first use your set-top box, your PIN code is 0000. In order
to make your PIN code secret, you should change it to a secret number
that you find easy to remember (see below).
To display the Control Settings menu:
1. On the Setup menu, highlight ‘Control Settings’, then press OK.
You will see a message asking you to enter your PIN code.
2. Enter the correct PIN code then press OK.
3. When you have finished using the Control Settings menu, press
back to redisplay the Setup menu.
Changing your PIN code
You can change the PIN code to a secret number which you find easy
to remember. Please make sure you do not forget your PIN code.
To change the PIN code:
1. On the Control Settings menu, highlight ‘PIN code modification’
then press OK.
‘New PIN code’ is highlighted.
2. Use the number buttons to enter a new 4-digit PIN code of
your choice. If you make a mistake, you can press L to delete a
digit.
3. Press D.
‘Repeat new PIN code’ is now highlighted.
4. Enter your new 4-digit PIN code again.
Note
If you do not have a smart card inserted in your set-top box, you
cannot use the Control Settings menu.