Operation Manual

30
Setup
www.strongsat.com
❖ Displaying the Main Menu
You need to display the Main Menu in order to use the Setup menus.
You can also use the Main Menu to display the TV and Radio channel
lists (see page 26).
To display the Main Menu:
1. Press menu.
2. Press D or U to highlight the item you want, then press OK.
3. To remove the Main Menu, press exit.
❖ Using the Setup menus
You use the Setup menus to:
◆ control who can watch or purchase certain programmes;
◆ change the language settings;
◆ change the TV settings;
◆ change the signal settings and search for new channels;
◆ view information about your set-top box;
◆ reset your set-top box to its factory-preset settings.
To display the Setup menu:
1. Press menu, then press D to highlight ‘Setup’, then press OK.
2. Press D or U to highlight the item you want, then press OK.
◆ While you are using any of the setup menus, you can press back
to cancel any changes and return to the previous menu.
◆ To cancel changes and redisplay digital satellite TV, you can press
exit.
◆ To save changes, you press OK.