Operation Manual

Installation

www.strongsat.com

❖ Making the installation settings

Choosing your country

If you have completed the installation instructions up to this point, the

Countries screen is displayed on your TV screen. (See page 16 for a

picture of the Countries screen.)

1. Take your remote control. If you have not already inserted the

batteries, do so now (see page 3).

2. Press U or D until the country you want is highlighted, then

press OK.

A Welcome screen now displays.

If you have:

◆ one LNB only, directed at Sirius, or

◆ two LNBs only, directed at Thor and Sirius,

you can carry out an ‘Automatic’ installation.

If you have any other LNB set-up, you must carry out a ‘Manual’

installation.

3. Use L or R to highlight the correct installation mode, then

press OK.

◆ If you selected ‘Automatic’, next see the section: ‘Checking

the signal and searching for channels’ on page 20.

◆ If you selected ‘Manual’, next see the section ‘Setting the

antenna conﬁguration and choosing a satellite’ on page 19.