Operation Manual

14
Installation
www.strongsat.com
❖ Inserting your smart card
1. Take your smart card from its packaging (if you have not already
done so) and hold it so that the picture is facing upwards, with
the arrow pointing towards your set-top box, and the ‘smart’
patch is facing downwards and at the end away from you.
2. Insert the smart card into the smart card slot of the front panel
of your set-top box. Insert it as far as it will go, without forcing it.
Taking care of your smart card
◆ Do not remove and re-insert your smart card unnecessarily.
◆ Do not bend your smart card; keep it away from children and
pets.
◆ Do not put your smart card in liquids or use cleaning fluids on it.
❖ Connecting a ‘magic eye’
On some models, you may be able to connect a ‘magic eye’ (not
supplied) to the RF output on your set-top box, so that you can
operate your set-top box from a different room.
To connect the magic eye, consult the instructions that came with it.
If you have connected up a magic eye, you must switch on the magic
eye support - see page 36.
signal
message
online
standby
smartcard
gital Satellite Receiver with Embedded NDS
signal
message
online
standby
smartcard
Digital Satellite Receiver