Operation Manual

13
Installation
ENGLISH
www.strongsat.com
❖ Connecting to the telephone line
1. Insert one end of the supplied telephone lead into the
telephone socket (labelled ) on the rear panel of your set-
top box, as shown in the diagram at the top of the page.
2. If you need to use an adapter, choose the correct adapter for
your location. If you are not sure which one to use, compare
with your telephone connector.
Insert the free end of your supplied telephone lead into the RJ11
socket on the adapter.
3. Remove your telephone connector from your telephone wall
socket. Insert your telephone connector into the correct socket
on your adapter.
Insert the adapter into your telephone wall socket.
Note
If your telephone wall socket is not an RJ11 socket (see below), you
will need to use one of the supplied adapters, shown right.
If your telephone wall socket is an RJ11 socket, you may need a
splitter (not supplied) so that you can plug in both your set-top box
and your telephone.
3
2
1
Telephone line
wall-socket
Telephone socket
Supplied telephone adapter
Supplied telephone lead
Adapter for Sweden
Adapter for Denmark
Adapter for Norway,
Finland and Estonia
Adapter for Russia, Latvia,
Lithuania and Estonia
RJ11 socket