Operation Manual

12
Installation
www.strongsat.com
Connection method 3: To TV only
If you wish to connect your set-top box to a TV only, connect up as
described in 3A or 3B below.
(The diagram below shows methods 3A and 3B combined.)
3A: If your TV has a SCART connector
1. Use the supplied SCART lead to connect your set-top box to
your TV.
2. Connect the lead from your satellite dish to the satellite input
connector (marked SAT IN) on your set-top box.
3. To continue to view terrestrial TV from your TV antenna,
connect the lead from your TV antenna directly to your TV (not
shown on the diagram).
3B: If your TV does not have a SCART connector
1. Use the supplied RF lead to connect from your set-top box’s RF
out connector (marked TO TV) to your TV.
2. Connect the lead from your satellite dish to the satellite input
connector (marked SAT IN) on your set-top box.
3. Connect the lead from your TV antenna to the antenna input
connector (marked ANT IN) on your set-top box.
Lead from your
TV antenna
Lead from your
satellite dish
Supplied SCART lead
Supplied RF lead
TV
ANTENNA
IN
IN