Operation Manual

11
Installation
ENGLISH
www.strongsat.com
Connection method 2:
To TV and VCR
If you have a VCR with a SCART connector and a TV with a SCART
connector, you can connect up as shown in the diagram below.
1. Use the supplied SCART lead to connect your set-top box to
your TV.
2. Use a SCART lead (not supplied) to connect your set-top box
to your VCR.
3. Connect the lead from your satellite dish to the satellite input
connector (marked SAT IN) on your set-top box
The RF connection is not required for digital satellite TV. However, you
may wish to connect RF leads as shown, to continue to view or record
terrestrial TV from your TV antenna.
You must then connect the lead from your TV antenna to the antenna
input connector on your VCR.
Supplied
SCART
lead
Supplied RF lead
SCART lead
(not supplied)
Lead from your TV antenna
Lead
from your
satellite dish
TV
ANTENNA
IN
VCR
TV OUT
ANTENNA
IN
IN
IN