Operation Manual

10
Installation
www.strongsat.com
Connection method 1:
To TV and VCR (with RF loopthrough)
If you wish to connect your set-top box to a TV (with or without a
SCART connector) and a VCR (without SCART connectors), connect
up as shown in the diagram below.
1. If your TV has a SCART connector, use the supplied SCART lead
to connect your set-top box to your TV, for improved quality
picture and sound.
2. Use the supplied RF lead to connect from your set-top box’s RF
out connector (marked TO TV) to the antenna input on your
VCR.
3. Use an RF lead (not supplied) to connect your VCR to your TV
as shown.
4. Connect the lead from your TV antenna to the antenna input
connector (marked ANT IN) on your set-top box.
5. Connect the lead from your satellite dish to the satellite input
connector (marked SAT IN) on your set-top box.
Supplied
SCART lead
Supplied RF lead
RF lead (not supplied)
Lead from your
TV antenna
Lead from your
satellite dish
TV
ANTENNA IN
VCR
TV OUT
ANTENNA IN
IN