Picture similar Digital Free-To-Air Satellite Receiver SRT 6020 User Manual
Figure 1 1 3 2 3 4 5 8 4 9 10 11 COAXIAL RS-232 S/PDIF TO TV ANT IN ON OFF AC 90-240 V~ 50/60 Hz Max. 20 W SAT OUT SAT IN Figure 2 1 TV SCART 2 S-VIDEO VCR SCART 5 6 7 Fixed Satellite Dish TELEVISION COAXIAL RS-232 S/PDIF TO TV ANT IN ON OFF AC 90-240 V~ 50/60 Hz Max. 20 W SAT OUT SAT IN TV SCART VCR SCART S-VIDEO COAXIAL RS-232 S/PDIF TO TV ANT IN ON OFF AC 90-240 V~ 50/60 Hz Max.
Safety Instructions SAFETY INSTRUCTIONS Grounding, Polarization — If this product is used with a specified AC adapter, the adaptermay be equipped with a polarized alternating current line plug (a plug with one blade wider than the other). This safety feature allows the plug to fit into the power outlet only one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, and then reinsert it.
Safety Instructions
PART 1 • English 2 2 2 3 3 2.0 YOUR RECEIVER 2.1 Front Panel 2.2 Rear Panel 2.3 Remote Control Unit 4 4 4 5 3.0 CONNECTIONS 3.1 Connecting to TV & VCR 3.2 Connecting to Digital Audio Amplifier 3.3 Connecting to Satellite Dish 3.4 Connecting to serial cable for downloading software 6 6 6 6 7 4.0 STARTING UP 4.1 Language Selection 4.2 Select Satellite 4.3 Antenna mode 7 7 7 7 5.0 MAIN MENU 5.1 Channel Organiser 5.3 System setting 5.4 Timer 5.5 SD Card 5.6 Game 5.7 Calendar 8 8 10 13 14 15 16 6.
PART 1 • English 1.0 INTRODUCTION 1.
PART 1 • English 1.3 Equipment Set-up WARNING: Indicates warning information. TIPS MENU Move to Indicates any other additional important or helpful information. Represents a button on the remote control or the receiver (Bold Character) Represents a menu item within a window. (Italic Character) English We recommend you consult a professional installer to set up your equipment.
PART 1 • English User-friendly remote control with coloured function buttons Low power consumption n Mosaic function: 9 TV Channel in overview Accessories: n User’s Manual n 1 Remote control unit n 2x Batteries (AAA type) n n NOTE: The batteries should not be recharged, disassembled, electrically short-circuited or be mixed or used with other types of batteries. 2.0 YOUR RECEIVER 2.1 Front Panel Figure 1 1. Power On/Off button 2. Channel Up/Down buttons 3.
6. VCR SCART Connector To connect your receiver to your video recorder using a SCART cable. Your video signal will now be looped through your receiver to your TV set. 7. S-Video Connector To connect your receiver to your TV set using a S-Video cable. 8. S/PDIF Digital audio output Use this coaxial output to connect your receiver to the input of your digital audio amplifier. 9.
PART 1 • English 3.0 CONNECTIONS 3.1 Connecting to TV & VCR Basic connection with a Scart cable (Fig. 3) 1. Connect the satellite signal from the LNB to the LNB IN connector. 2. Connect the TV SCART connector at the back of the receiver to the SCART IN connector on your TV set. Advanced connection of the receiver to the TV set and VCR (Fig. 4) 1. Connect the satellite signal from the LNB to the LNB IN connector. 2.
PART 1 • English 3.4 Connecting to serial cable for downloading software English Connect the RS-232 connector on the back of your receiver to the Serial port of your computer using a serial cable. Instructions how to download software can be found on our website www. strongsat.com (support > download). However, this receiver can download new system software automatically by satellite. (Fig. 9) 4.
PART 1 • English Transponder field and select transponder by pressing LEFT/RIGHT button). Then choose field Move Dish and adjust position of the dish by pressing the LEFT/RIGHT button. Once you adjust the dish position choose Store position, set number of the position by pressing LEFT/RIGHT button. Then choose NEXT and press the OK button. The Channel Setup menu will appear. 3. Dish mounted on GOTO X motor Set Antenna mode to GOTO X, choose NEXT and press the OK button. The menu Adjust antenna will appear.
PART 1 • English Move channel Press the UP/DOWN keys to point the focus of the menu to the channel of your selection. Press the LEFT/RIGHT keys to point the focus of the menu to the column “Move”. When the focus is on column “Move”, press the OK button to confirm selection of the channel, using the UP/DOWN buttons move the channel to its new location and press the OK button to confirm the new location. Repeat this for every channel that you want to move.
PART 1 • English 5.2.2 Auto Scan Press the GREEN key to set the scan mode to Free or Free+Scrambled. If mode is Free only “Free to Air” channels will be added to the channel list. If mode is Free+Scrambled all channels from selected satellite will be added to the channel list. Press the YELLOW Key to set the Blind Scan to ON or OFF. Blind scan function is useful to scan new added satellite, but scan may take long time.
PART 1 • English n English 5.3.1.2 TV settings You can set the TV mode, Screen mode, Video output and Modulator setting. n TV mode In TV mode Screen press OK or RIGHT to select mode, press OK to confirm. If you don’t know which standard your TV has, please select AUTO. n Screen mode In TV format Screen press OK or RIGHT to select 4:3 or 16:9, press OK to confirm. n Video output Press OK or RIGHT to select CVBS, RGB or S-Video, press OK to confirm. WARNING: if RGB is selected then S-Video output is OFF.
PART 1 • English Menu Lock Press OK to select whether you need the lock or not for the Menu, YES or NO, press OK to confirm. If the menu lock is on, then for some operations such as search program and set factory default, you need to enter your PIN. n Parental Setting Set some channels to lock status. If a channel is locked, the user has to enter the parental PIN code correctly before watching the locked channel. Use the UP/DOWN keys to select the channel you want to lock.
PART 1 • English Update from SD card First you need to store the file with extension *.crd to the root folder of the SD card. File with software update can be downloaded from our web site www.strongsat.com. Insert the SD card with *.crd file to the SD card slot of the receiver. Go to menu System Setting – System Update. Select SD Card Data and press OK. On the left side of the screen you will see the list of folders, at the right side you will see the list of files in root folder.
PART 1 • English Start Date: Start Time: End Time: Channel Type: Channel name: You can set the start date of the timer action. You can set the start time of the timer action. You can set the end time of the channel viewing when the Timer mode is on Time Interval. Select between TV and Radio. Press the Right button to display the channel list and using the navigation buttons select the channel to be shown when the receiver will power on by the timer. 5.
PART 1 • English English Repeat All: use LEFT/RIGHT to select ON or OFF. If you selected ON then slide show will be looped continuously, until interrupted. If you selected OFF then each picture will be shown once. After selection of slide show options select OK and press OK. During Slide Show: Use UP/DOWN buttons to force slide change to next/previous Use PAUSE button to delay current slide on screen as long as you wish. To resume slide show press PAUSE button again Use EXIT button to stop Slide Show. 5.
PART 1 • English 5.6.1 Boxman UP/DOWN/LEFT/RIGHT key to move the cursor to push the box. EXIT to exit from game. 5.6.2 Mine UP/DOWN/LEFT/RIGHT key to move the cursor. MENU button: To mark the mine. OK button: to open cell 5.6.3 Tetris LEFT/RIGHT key to move the block to left or right. DOWN to drop the block. UP to Rotate the block. 5.6.4 Rush Hour Press UP/DOWN/LEFT/RIGHT keys to move the cursor, and press OK to select the object. 5.6.5 Gomoku Press UP/DOWN/LEFT/RIGHT keys to move the cursor.
PART 1 • English 6.3 EPG (Electronic Program Guide) NOTE: not all broadcasters provide program information. From normal view mode press the EPG button. The EPG Menu will appear. Press UP/DOWN to choose the channel. Press RIGHT to display programs schedule of the current channel. 1. In EPG program schedule menu: Press the UP/DOWN keys to choose the program items. Press LEFT/RIGHT keys to get programs schedule for previous/next dates. Press EXIT to return to EPG Menu.
PART 1 • English 6.7 Subtitles function From normal view mode press SUB button. If channel has subtitle information the subtitles language selection menu will appear. Use LEFT/RIGHT buttons to select between DVB and Teletext subtitles. Use UP/DOWN to select subtitles language. Press OK to confirm your selection. A.1 TROUBLESHOOTING There may be various reasons for the abnormal operation of the receiver. Check the receiver according to the procedures shown below.
PART 1 • English A.2 SPECIFICATIONS Video Decoder Profile level: Input Rate: Video Resolution: Aspect Ratio: MPEG-2 MP@ML Max. 60 Mbits/s 720 x 576 (PAL), 720 x 480 (NTSC) pixels 4:3, 16:9 Audio Decoder ISO/IEC 11172 LAYER I&II Sampling rate: Audio modes: 32, 44.1, 48 kHz Stereo, Joint stereo, Dual mono, Mono Tuner Front-End: Input Frequency Range: RF Input Level: LNB Power: DiSEqC Version: DVB-S 950 ~ 2150 MHz -25 ~ -65 dBm 13/18 V DC (+/- 5%) Max. 500 mA, Overload protected 1.0 & 1.
PART 1 • English General Data Input Voltage Range: Power consumption: Stand-by Power consumption: Operating Temperature: Storage Temperature: Operating Humidity Range: Size (WxDxH) in mm: Weight: 90~240 V AC 50/60 Hz max 25 W <8W +0 °C ~ 40 °C -30 °C ~ 80 °C 10% - 85%, RH, Non-condensing 260 x 210 x 40 1,2 kg A.3 GLOSSARY OF TERMS C-Band DiSEqC EPG Fixed Dish Free-To-Air broadcast Ku-Band LNB MPEG Network PAL Parental lock PID PIN Code Polarization RS-232 20 3.7 ~ 4.2 GHz Frequency.
Environmental Issues ENVIRONMENTAL ISSUES STRONG is committed to reducing the impact of its products on the environment. To maximise the benefits of our design enhancements, your co-operation is required. Electronic product recycling Do not dispose of this product with your domestic rubbish. At the end of its useful life, this product contains materials which when processed correctly can be recovered and recycled.
Environmental Issues
