Picture similar Digital Free-To-Air Terrestrial Receiver SRT 5011 User Manual
PART 1 • English 1.0 INSTRUCTION 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Features & Accessories 2 2 2 3 3 2.0 CONNECTION 2.1 Connecting to Terrestrial Antenna 2.2 Connecting to TV and VCR with SCART cable 2.3 Connecting to TV with RCA cable 2.4 Connecting to a Digital Audio Amplifier 2.5 Connecting to PC 4 4 4 4 4 4 3.0 YOUR RECEIVER 3.1 Front Panel 3.2 Rear Panel 3.3 Remote Control 5 5 5 6 4.0 FIRST TIME INSTALLATION 6 5.0 MAIN MENU 5.1 Channel Organiser 5.2 Channel Search 5.
PART 1 • English 1.0 INSTRUCTION 1.
PART 1 • English 1.3 Equipment Set-up Warning Indicates warning information. Tips Indicates any other additional important or helpful information. English We recommend you consult a professional installer to set up your equipment.
PART 1 • English n RS-232 port for updating control software and additional services subject of local broadcast condition Accessories: n User’s Manual n 1 Remote control unit n 2x Batteries (AAA type) Note: The batteries should not be recharged, disassembled, electrically short-circuited or be mixed or used with other types of batteries. 1 2.0 CONNECTION 2.1 Connecting to Terrestrial Antenna Fig.
PART 1 • English 3.0 YOUR RECEIVER 3.1 Front Panel Fig. 5 English 1. Mode indicator The RED light indicates that the receiver is in STAND-BY mode. The GREEN light indicates that the receiver is in AWAKE mode. 2. Power ON/OFF button 3. Up/Down buttons 4. 4 digits display In STAND-BY mode indicates current time In AWAKE mode indicates current channel number 3.2 Rear Panel Fig. 6 1. ANT IN To connect a terrestrial antenna for receiving broadcasting signal. 2.
PART 1 • English 3.
2 The Preference Menu will appear. Please select your Country, Antenna Power mode and Channel numbering. Press UP/ DOWN to select the items, press RIGHT/LEFT to change the value of the item. If you choose BACK, it will go back to the previous menu screen. Press OK to confirm. 3 You enter the Adjust antenna menu. Press LEFT/RIGHT to select Channel No, adjust your antenna direction and position (if necessary) to get maximum levels on the signal level and quality indicators.
PART 1 • English 5.2.1 Automatic Search Press OK over the Automatic Search. The warning message “Do you want to start Automatic Search?” will appear. Press LEFT/RIGHT to move the cursor and OK to continue. The message “Do you want to erase your previous channel list?” will appear. Please press LEFT/RIGHT to choose whether to erase your previous channel list.. If you want to cancel channel search press the EXIT button.
PART 1 • English 5.3.1.3 Country Press OK/RIGHT to select your country, press OK to confirm. If your country is not in the list, select Other. It will apply the most common frequency plan for European countries. English 5.3.1.4 Channel Numbering Here you can set the channel list by different number format: Appearing order or Operator defined. 5.3.1.5 Antenna Power Press OK/RIGHT to select turn OFF or ON the antenna power, press OK to confirm.
PART 1 • English 5.3.3.3 Parental Setting Set some programs to lock status. If a program is locked, the parental PIN code has to be entered correctly before watching the locked program. Use UP/DOWN keys to select the channel you want to lock and press OK to confirm. 5.3.3.4 Change PIN PIN is Personal Identification Number. To modify the password, you need to enter the current PIN, a new 4 digit password and once again the new one for confirmation; the system password will be changed then. 5.3.
3. In Hyper Terminal menu select “transfer” item and then press “send file” item. Select the file with the new software (*.UPD) you want to download and choose the protocol “1K X modem”. Finally press ok and a download menu will appear in the computer screen. Power on the receiver, then the download process will begin. 4. After about 2.5 minutes, the message “OK, Reset” will appear on the computer on Hyper Terminal window, which means the download has completed successfully. 5.
PART 1 • English 5.5.2 Tetris LEFT / RIGHT: DOWN: UP: Move block to left or right direction. Drop block. Rotate block. 5.5.3 Gomoku UP / DOWN / LEFT / RIGHT: OK: Move the cursor. Place the gobang. 5.5.4 Calendar UP / DOWN: LEFT / RIGHT: +/- months. +/- years the range from 1900 to 2100. 6.0 OTHER OPERATIONS 6.1 Mosaic In no-menu state, press MOSAIC button. Screen will be divided into nine pictures. Press UP / DOWN/ LEFT / RIGHT keys to choose one of current programs.
PART 1 • English 6.4 Subtitles 6.5 Information When you press INFO key twice in the no-menu state, the screen will show you current channel information. A.1 TROUBLESHOOTING Before requesting service, please check the table for a possible cause of the problem. Some simple checks or minor adjustments may restore proper operation. The most common problems are related to cable connections, please disconnect and connect all cables again.
PART 1 • English Symptom Remedy Remote control fails to operate receiver Check the batteries in your remote control. Make sure your receiver is in the operate mode. Make sure you are pointing your remote control at the receiver’s front panel Make sure there is no direct sunlight from behind the receiver There may be a temporary transmission error, or your receiver has lost some of its software settings.
Tuner Front End: Input frequency range: Loop through frequency range: Input signal level: DVB-T, UHF & VHF Tuner 174 ~ 230 MHz (VHF I/III) and 470 ~ 862 MHz (UHF) 47 ~ 862 MHz -82 ~ -20 dBm Memory and System Flash memory: SDRAM: 1 MByte 8 MBytes English PART 1 • English Connectors ANT input - IEC Female TO TV - IEC Male TV SCART: supports RGB, CVBS, Audio Left/Right Output with Volume Control VCR SCART: supports CVBS, Audio Left/Right Output with Volume control 3 RCA for Video (Yellow), Audio Left/Rig
PART 1 • English A.3 GLOSSARY OF TERMS DVB-T MPEG Network PAL PID RS-232 16 Digital Video Broadcasting Terrestrial – Digital TV via antenna (same as DTTDigital Terrestrial Television). Moving Picture Experts Group is founded by the ISO. MPEG is a standard method for digital transmission of video and audio. Also known as bouquet is a set of channels offered by a single broadcaster. Phase Alternate Line colour system adopted by European broadcasters.
Environmental Issues ENVIRONMENTAL ISSUES STRONG is committed to reducing the impact of its products on the environment. To maximise the benefits of our design enhancements, your co-operation is required. Electronic product recycling Do not dispose of this product with your domestic rubbish. At the end of its useful life, this product contains materials which when processed correctly can be recovered and recycled.
